This is my first install of VI3 and the associated utilities.
I have two IBM xSeries 3650 servers with the VM Center on a Windows 2003 SP2 server. All data is on several LUN's of an IBM DS4700 SAN.
Consolidated Backup is installed on a proxy server ( IBM 336 Server with a QLogic 2310FL HBA attached to the fiber switch and in the same zone as the ESX servers.)
The Qlogic utilities can see all assigned LUN's on the SAN. When I try to run the vcbmounter command, it fails with the error shown below. Snapshots are created and then destroyed on the SAN but it seems I can't connect the proxy server to the appropriate LUN. Any Ideas why?
H:\>vcbmounter -h hqvmcenter -u username -p password -a ipaddr:fqdn.mycompany.com c:\mnt\hqvcbtest -t fullvm
\[2007-07-17 13:29:58.955 'App' 3096 info] Current working directory: H:\
\[2007-07-17 13:29:59.471 'BaseLibs' 3060 warning] \[Vmdb_Unset] Unsetting unknown path: /vmomi/
Copying "\[HQESX1-Main] vcbtest/vcbtest.vmx":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest/vcbtest.nvram":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware-5.log":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware-1.log":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware-2.log":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware-3.log":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware-4.log":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware-6.log":
0%=====================50%=====================100%
**************************************************
Copying "\[HQESX1-Main] vcbtest//vmware.log":
0%=====================50%=====================100%
**************************************************
\[2007-07-17 13:30:08.487 'BaseLibs' 3060 warning] \[Vmdb_Unset] Unsetting unknown path: /vmomi/
\[2007-07-17 13:30:08.987 'App' 3096 error] No path to device NAA:600a0b8000298564000002e5466ff4a6313831342020/0 found.
\[2007-07-17 13:30:09.268 'BlockList' 3096 warning] Could not log out (hqvmcenter
:vmadmin)
\[2007-07-17 13:30:09.268 'vcbMounter' 3096 error] Error: Failed to open the disk: One LUN could not be opened
\[2007-07-17 13:30:09.268 'vcbMounter' 3096 error] An error occured, cleaning up.
..