Hi,
We need to set the time vaules for our ESX's HBA's to specific vaules in accordance with out SAN vendor, however, I'm unsure where to place the following values in the /etc/vmware/esx.conf file. We cannot set them on the HBA itself as there is no option in the HBA's BIOS to do it, I would welcome some advise on this issue. We are running ESX 3.0.2 Build 61618.
Vendor Recommended Settings
qllink_down_timeout=30
qlport_down_retry=255
qlogin_retry_count=255
ql2xmaxqdepth=32
Kind regards
Si
Life, The Universe, & Everything