vmhba1 is showing the correct number, but 2 is not. I've tried multiple scans using the GUI and have tried:
esxcfg-rescan vmhba2
Rescanning vmhba2...done.
On scsi1, removing:.
On scsi1, adding:.
Then: esxcfg-mpath -l
Disk vmhba0:0:0 /dev/cciss/c0d0 (69459MB) has 1 paths and policy of Fixed
Local 3:2.0 vmhba0:0:0 On active preferred
Disk vmhba1:0:0 /dev/sda (512000MB) has 2 paths and policy of Most Recently Used
FC 6:1.0 500508b200cf3872<->5006016839a00614 vmhba1:0:0 On active preferred
FC 6:1.0 500508b200cf3872<->5006016139a00614 vmhba1:1:0 Standby
Disk vmhba1:0:1 /dev/sdb (512000MB) has 2 paths and policy of Most Recently Used
FC 6:1.0 500508b200cf3872<->5006016839a00614 vmhba1:0:1 On active preferred
FC 6:1.0 500508b200cf3872<->5006016139a00614 vmhba1:1:1 Standby
Disk vmhba1:0:2 /dev/sdc (512000MB) has 2 paths and policy of Most Recently Used
FC 6:1.0 500508b200cf3872<->5006016839a00614 vmhba1:0:2 On active preferred
FC 6:1.0 500508b200cf3872<->5006016139a00614 vmhba1:1:2 Standby
Disk vmhba1:0:3 /dev/sdd (614400MB) has 2 paths and policy of Most Recently Used
FC 6:1.0 500508b200cf3872<->5006016839a00614 vmhba1:0:3 On active preferred
FC 6:1.0 500508b200cf3872<->5006016139a00614 vmhba1:1:3 Standby
Does anyone have any ideas??? I've checked the fiber and it looks good and my SAN guy says he can see down both paths to the server.