I just set up 3 ESX 3.5 hosts in a test environment.
I've got them attached to a couple Cisco 9000 fibre switches and I have 1 LUN attached to each switch.
The switches are trunked and are passing VSAN traffic fine (I tested it with a Windows box and can see both LUNs).
When I initially did a scan on my ESX storage adapters, they only found the 1.5TB LUN. I rebooted all 3 of my ESX servers and
then they all only found the 927MB LUN. Same thing after another scan.
Is there some limitation with ESX that it will only see 1 LUN at a time?
I've attached a snapshot of the physical layout in Fabric Manager to give you a better idea of how it's all attached.
Thanks for any help.
Scott