Sun StorageTek 6140 Storage and ESX 3.0.2 - Host mode for path failover

Hello, all.

I try to install SunBlade 8000(ESX Server), Brocade Silkworm 200E SAN and Sun StorageTek 6140(Dual Controller, Active/Passive).

I had been created volume(RAID-5) on the 6140 storage and mapped to the ESX host. but, there are some configurable parameter

for mapping the volume to the host such as "Host Type".

- Host type list

Solaris (with Traffic Manager)

Solaris (with Veritas DMP or other)

Sun StorageTek 6920/6940

Sun StorageTek 53xx NAS Gateway

Windows 2000/Server 2003 non-clustered

Windows 2000/Server 2003 clustered

Windows 2000/Server 2003 non-clustered (with Veritas DMP)

Windows 2000/Server 2003 clustered (with Veritas DMP)

AIX

AIX (with Veritas DMP)

AIX failover

IBM - SAN Volume Contoller

HPUX

Irix

Linux

Netware failover

I choose Netware failover type, because Hostmode of Hitachi UPS is Netware on the VMware documents.

I'm not sure which type will be correct for ESX Server.

Any idea?

Thanks in advance.