Currently our production VMWare ESX 3.5 server is a Dell 1950 with 2 Dual Core 3.0 GHz with 13 GB of RAM and 2 NICs. I looking to setup a DMZ network adapter and a LAN adapter. The LAN adapter seems to bridge automatically on our network without any configuration. So, servers that just connect on the LAN convert and import just fine with additional configuration needed. We have not had much success bridging to the 2nd NIC on the DMZ nor configuring the DMZ NIC with an IP (there is no DHCP on this part of the network). We are trying to figure out how to bridge the NIC maunally in the ESX 3.5 console. We are not using VC 2.5 to do any network management. We have a Red Hat Mailscanner and multiple servers that require a DMZ and LAN address. We are unaware of how to configure this manually, can someone please lend a hand. Thank you for time and I look forward to your responses/
↧