esx 3.5 iscsi luns not visible

Hi. Recently upgraded esx 3.0.1 to 3.5 and iscsi does work (HP Proliant DL380 G5 + HP MSA1510i with 1.32.200 firmware). On esx 3.0.1 iscsi device was vmhba40 and now it is vmhba32.

When trying to rescan, output on vmkernel logfile is like this:

Mar 16 13:09:07 vmware vmkernel: 0:00:06:53.290 cpu0:1040)SCSI: 861: GetInfo for adapter vmhba32, , max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad001f

Mar 16 13:09:07 vmware vmkernel: 0:00:06:53.295 cpu3:1039)SCSI: 861: GetInfo for adapter vmhba32, , max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad001f

Mar 16 13:09:07 vmware vmkernel: 0:00:06:53.305 cpu1:1041)SCSI: 861: GetInfo for adapter vmhba32, , max_vports=0, vports_inuse=0, linktype=0, state=0, failreason=0, rv=-1, sts=bad001f

tried on broadcom and intel nic - doesn't matter

file initiatorname.iscsi contains: GenerateName=yes

vmkiscsi.conf contains valid target name.

any suggestions?