HI
Running ESX 3. ESX is installed on it's own disks. Created 2 other disks on local storage on 2 different RAID arrays. I have several virtual machines running on one of the RAID arrays.
I realized that I had accientally formatted one of the disks as a RAID0 instead of a RAID5. I DID NOT disconnect the storage before bring the ESX server down and reinitialized the drives as a RAID5 using the Dell RAID controller software.
Upon reboot, the server hangs during boot at "Remounting root file system read-write mode"
I assume it is looking for the storage that it was using prior to my reinitialization. What do I need to do to tell it that the storage it is no longer there so I can get ESX to boot? I realize I probably should have disconneced the storage before making changes to the disk.
I'm not much of a Unix guy but I can get around. May need a little detail on command though.
Any help is much appreciated.
Thank You